Date: Mon, 23 Jun 2008 21:57:32 GMT From: "user459@netzero.net" Subject: Adult/Youth - Rest Stop 23 ** Before I start, I want to thank all of the folks who have responded to my series. All have been positive and some have offered very valid suggestions. I appreciate the feedback. If any of these have turned you on, let me know what you did about it....** Rest Stop 23 I woke up to the thoughts of a very busy Friday. Here's what I pictured happening today: Jamie's package would arrive FedEx, Lo Chan would deliver the wired prototypes, Jamie would let me know if he was coming in to stay for the game, and soccer practice with the team and Kyle. It would be a game of timing and speed to get this all accomplished in one day. Lynn was already up and showered, so the bathroom was free for me to do the same. I took my shower and did all the requisite morning chores and met up with Lynn and Kelley at the kitchen table. I gave Lynn a big kiss and then bent down to give Kelley one. She had a bit of a sheepish look on her face, as showing some concern that I might divulge what I knew about her and Kyle. I gave her a kiss and a good squeeze to reassure her I wasn't going to get her in trouble. She dove back into her cereal, and, before I knew it, she and Lynn were out the door and on their way to school and work. I heard the garage door close and raced for the office. I signed on and checked my email first thing. There was an email from Jamie, so I opened it up: "Mike, my mom says I can come so she is taking me to the bus after school. I told her it was for soccer so she said OK. She said to thank you for offering so I will thank you in person when I get there LOL. I get in to your town at 5:15. Jamie. I have my cell phone so you can call me to say you're OK to pick me up. Jamie." I didn't know whether he'd get it or whether he'd already left for school, but I replied that I would pick him up at 5:15. I called his cell, but got voice mail and left him the same message. OK, that's one thing off my list. I checked my inbox and saw a message from Kyle and one from Lo Chan. I read Kyle's first: "Mike, Mom is fine with me staying over Saturday and going with you to bring Jamie home on Sunday. She wanted to go help her sister anyway. See you at practice. Kyle." Then I read Lo Chan's: "Mike, Project is done and can drop by Friday morning to deliver. Ryan is off from school and can come with me. Call my cell to confirm. Lo." I immediately picked up the phone and called Lo. He was on his way to pick up his nephew and had already loaded the project in the car in anticipation of delivering it to me this morning. He would be here in a half hour, so I had time to run the computer program through its paces one more time. I had it running on the lab computer and the office computer and had established different identities on each one. I signed each one on to the web site I developed for this purpose and established communication between the two. Preliminary test showed they were talking to each other, so now I just needed the transceivers on each end. By the time I was done testing, I heard the doorbell and went to see who it was. Instead of Lo Chan, it was the FedEx guy with the package from Jamie. I brought it to the lab and got Jamie's mold set up to pour when I heard the doorbell again. This time I was greeted by Lo Chan and Ryan. "Hi Mike," Lo said as he ushered his nephew into the house, "This is Ryan; Ryan, this is Mike." Ryan bowed to me and said, "Hello, Mike, nice to meet you." Such a polite greeting from this very handsome young man. I noted a bit of an accent. "Nice to meet you, too, Ryan," I said. I led them to the lab and Lo carried in the boxes and set them on the table." "They came out real nice," he said as he pulled them carefully out of the box. It looked strange seeing all those wires trailing out of the base of these dick shaped objects! I took the model of my dick and set it up in the lab and took the mold it was taken from and set it up in the office. It took about twenty minutes to connect all the wires from the units to the controllers and the controllers to the computers via high speed Firewire ports. Ryan ran back and forth between Lo in the lab and me in the office, fascinated by what we were doing. I had video conferenced the two computers, so Lo and I could see each other on the monitors as well. "Lo, touch the transceiver model on your end," I requested. I had my fingers up inside the mold at my end. I saw Lo reach for the model of my dick and take it in his hand. I left some movement inside the mold! I was thrilled, but I did need a more realistic test. "Hold on, Lo, I'm going to have to go for a live test." I unzipped my pants and took out my dick. I didn't know how I was going to stay soft long enough to get it in the mold, but I did. Just as I got about half way in, Ryan came running into the office. "Wow, that very cool, Mike!" he said as his eyes focused on my dick sliding home into the mold. His attention made my dick get even harder. I noticed his shorts starting to tent out in the front, too. "It will be even cooler if this thing works they way it should," I said. I no sooner got those words out of my mouth and I felt pressure on my dick. I looked at the screen and Lo was sliding his hand up and down the model. I could feel the movements, but not as strong as I wanted. It came to me that I would have to build a stiffer form around the mold to concentrate the force and direct it to the interior of the mold. My theory was proven when I noticed the outside of the mold moving when the piezo fibers were triggered. All in all, the test was a success. I logged out of the program and tried to get my cock out of the mold. It was all but impossible with a gorgeous boy standing within my reach with a hard on poking the fabric put on the front of his shorts. "Ryan, please go tell your uncle that the test is complete, OK?" I asked. He nodded and ran off to the lab. I picked up a copy of Engineering Today magazine and started reading the table of contents while ignoring my dick stuck in the mold. Before I got half way through, I felt my dick relax and was able to pull out. I'll have to check on what lubricant will be compatible wit the silicon rubber mold material. I headed for the lab. "So, it works?" Lo asked. "It works, but I'm going to have to add a layer of material to stiffen the outside of the mold and focus the movement of the piezos." I said. "I understand," Lo said, "Do you have the other pieces for me?" "They just came in just before you got here," I said. "I have it set up to pour now." I showed him the mold and the set up for pouring it with the dowel forming the interior wiring channel. I measured out the correct amount of the two components. I had already coated the inside of the mold with mold release, so I was ready to pour. I mixed the two liquids together thoroughly and then poured it carefully into the mold. "Now all we have to do is wait about 30 minutes," I said. I saw Ryan looking at the extra models of mine and Kyle's dicks I had set out on the counter. "May I touch, please?" he asked. "Sure," I answered. He reached for Kyle's first and felt it all over. "Feel like real thing," he giggled. The he took it and held it to his crotch and wiggled it around with a big smile on his face. We all laughed with him. "Mine smaller!" "Really, can I see?" I asked. He looked at Lo who gave him an affirmative nod and then back at me. He set Kyle's model down and pulled down his shorts and stepped out of them. He wasn't wearing any underwear, which is why he tented out so easily before. He pulled up his T shirt to reveal a wondrous set of boy genitals. He had creamy white skin and a totally hairless crotch with a rigid boy penis pointing almost straight out over a white, wrinkly sack. He had been circumcised and the head of his penis looked like a little mushroom cap. "Can I touch?" I asked. He nodded his head and tucked the bottom of his T shirt under his chin. I glanced Lo's way and he gave me a nod to encourage me on. I pulled Ryan next to me and reached out and covered his dick and balls with my hands. I gently felt them with my right hand while my left one cradled his butt cheeks. "That feel nice," he said pushing his crotch further into my hand. "It looks very nice, too," I said. "Would you like me to make a model of it like the one you saw?" He looked again to Lo for approval. "I would like one of those, too!" said Lo. "How about both of you?" I suggested. "It's just as easy to set up for two as it is for one. Do you think you can stay hard for about five minutes?" "I'm sure I can," said Lo, "I've been hard for about twenty minutes already!" He lifted his shirt and grabbed the outline of a very hard cock in his shorts. From the look of things, he hadn't worn underwear, either. "I can!" announced Ryan. His little boner hadn't gone down a millimeter since we started. "OK, I just got some new material called "Body Double" that cures in under five minutes, but I only have ninety seconds to work with it." I said. This material comes in a dual chambered tube that mixes the two components as the plunger is pushed and delivers it to the surface to be coated. "Before we can get started, we have to coat you both with a special mold release. There can't be any hair in the area or it will stick to the mold." "No hair!" Ryan said. "Me, neither!" said Lo as he dropped his shorts. Besides being naturally smooth, his entire pubic area was shaved clean. "I keep mine that way all the time." His cock was rock hard already and the view of it was unhindered by any hair growth. Its features were very pronounced and the veins and ridges would make a wonderfully detailed piece. "Good." I said, "Now you two stand side by side here next to the table and we'll get started. I got the mold release cream and offered some to Lo. I turned to Ryan and decided to apply his myself. I took some in my palm and reached under his scrotum to coat it and then worked my way back up, coating all around his balls and the crease between his sack and his thigh, and up to the top of his pubic bone above his penis. I saved the best for last as I worked the lotion into his little pecker and stroked it back and forth. "Now this is the only bad part," I said as I reached for two birthday candles and the tube of KY jelly. "I have to put these into the pee holes before I put the molding compound on. Are you OK with that?" "I guess so," Lo said as they looked at each other apprehensively. "I'll do Ryan first, then I can do you, Lo, or you can do it yourself while I am doing Ryan's mold." "I'll do it myself," Lo said. I took hold of Ryan's hard pecker and used my thumbs to open up his piss slit. He gasped a little when I slid it in, but stayed hard and held onto my shoulder. "OK, hold still," I said. "Lo, are you done there? I could use some help." "I'm done," he answered, "What can I do?" "As I squeeze this out, use this brush to cover Ryan's penis and balls evenly." I pressed the plunger and deposited some of the molding compound near the base of Ryan's penis and up one side. Lo quickly spread it out to cover the area and I moved the gun around to apply more compound. Lo worked at spreading it around and did a great job of covering Ryan's crotch wall to wall with an even coating of compound. While this was going on, Ryan was watching intently while squirming and emitting little gasps and sucking in his breath. I checked to make sure all of his cock and balls were done. I wanted more that just a dick model of Ryan; I wanted the whole package. "Now you have to sit still and stay very hard while we do Lo," I instructed. "Can you do that?" "Yes, I can do that," he said. "I stay hard watching you do Uncle Lo." I motioned for Lo to step over to where I was sitting on a low stool and had him stand where Ryan would have a ringside seat view. I started the timer for five minutes, took the compound gun in one hand and the brush in the other and began applying it to Lo's cock. I only wanted a cock model, so it went fairly quickly. I began at the top and let the material flow down to the root of his cock, helped along with the brush to ensure complete coverage without any bubbles or voids. Thank goodness he was circumcised; I don't know what I would have done with a foreskin thrown into the equation! I got a real good coating on his dick and pushed back to admire my work. There were two hard cock covered in molding goo staring me in the face. I moved closer to Ryan and reached behind him and caressed his butt cheeks with one hand and tweaked his nipples with my other hand. He was definitely hard, but I wanted him to stay that way. I let my fingers drift into the cleft between his cheeks and over his tight little puckered hole. He squirmed and moaned and pushed back onto my fingers, so I placed the tip of my middle finger right on the target and wormed my way in up to the first knuckle. Lo had moved up close also and was rubbing Ryan's chest while Ryan reached up and rubbed his ass. I was just as hard as they were, so I stood up and dropped my shorts and underwear. Ryan reached for me and pulled me toward him by grabbing my dick. The next thing I knew he had the head of my dick in his mouth and was running his tongue over the ridge around my glans. I just about fainted right there, but instead I took a half step closer and watched my dick slide further into his mouth. Lo reached down and latched onto the remaining part of the shaft and started stroking back and forth on it. Between the two of them I was getting to the point of no return. Just then, the timer went off and scared me half to death! I pulled out of Ryan's mouth and away from Lo's hand to shut it off. When I got my breath back I sat back down on the stool and rolled up to Ryan. I told Lo to turn around and pick up one of my magazines and read the editorial comments to me out load while I tended to Ryan. "How old are your, Ryan?" I asked. "I'm almost eleven now," he said. "And what is your favorite subject in school?" I quizzed. "I like math and science," he said. I could see the mold beginning to drop from his dick going soft so I asked a few more questions about school until I could reach over and pluck the mold off his soft pecker and balls. I slowly withdrew the birthday candle from his pee hole. He sighed with relief. Meanwhile, Lo was still reading. "Lo. Come back over here," I instructed. He stepped toward me and his was drooping also. I reached out and worked the mold off his dick. He reached down and removed the candle. I took both molds to the table next to Jamie's mold and set them up for their first pour. I sprayed them with mold release and poured out enough of the two components to fill all three molds. I inserted the interior dowels into Lo's and Ryan's and fixed them in place. I mixed and poured the compound into the three molds and turned to the two naked males standing next to me. "Do you want to take this show into the house while these cure?" I asked. "I'm game," replied Lo. Ryan just took my hand and led the way into the house. I brought them into the house and to my office. I had Ryan lay down on the couch and I kneeled next to it and lowered my head to his crotch. He had boned up again and I slid his small dick between my lips and as far down as it would go. It felt so good to have the whole thing in my mouth! I let my tongue wander and it traveled down to run over his wrinkly sack. I felt Lo's hands on my but and then a warm wet sensation between my cheeks. He was licking my ass! I wasn't crazy about it at first, but I didn't want to give up on the morsel in my mouth to tell him so. I figured, what the hell and went for it. I sucked and bobbed on Ryan's peter until I felt him tense up and start thrusting into my mouth. His body went stiff and he had a dry orgasm. I pulled back and Lo left his position behind me. He started to reach for me, but I had to stop him. "Lo, I have to tell you something and I hope you won't be insulted," I said. "It's OK, Mike, what is it?" "I like you, but I'm really not into men; just boys." I said. It's true, I didn't have a real attraction to men, probably as a reaction to my history of abuse, but I definitely had an attraction to boys like Jamie, Kyle, and Ryan. I hoped I would not have to go into detail with Lo. "I understand," he said. "I like both, but I can respect that. Here, try this." He had me kneel so my dick was near Ryan's head and he took a position between his legs, lifting them high. He said something in Chinese to Ryan and he turned and enveloped my cock with his mouth. Lo used some spit to lube Ryan's hole and slid right in with minimum effort. I could see they had done this before. This boy had sucked cock before, too! He took it like a pro from both ends and Lo and I were pumping into him in about the same timing. We were all horned up from what we had done and from being exposed to each other in the lab, so it didn't take long to reach our peak. I was feeling the pressure mount when I saw Lo pull out and start stroking his cock furiously over Ryan's stomach. I did the same and aimed my dick at the same target. Within seconds we both blew our loads on Ryan's stomach, first Lo; then me. Ryan laughed as the two loads were deposited on his bare skin. He then pulled me back to him and caught the last dribble on his tongue and licked my dick and my hand clean. I bent down and licked my cum off his tummy while he giggled and squirmed on the couch. I left Lo's cum there for him to take care of. Lo wiped up the mess he made with a tissue from the desk and the three of us headed back to the lab, naked and soft. Of course, Ryan ran ahead of us and treated me to another look at his snowy white bubble butt; I wondered what it would be like to slide in between them. I hoped I`d get the chance to find out. Back in the lab, we checked the molds and found the material had set up enough to remove the models from the molds. I had Ryan hold onto his mold while I slowly worked the model of his cock and balls free from their confinement. When it was free, I trimmed of the sprue where the candle had been and held it up for them to see. "Nice!" said Lo. "I can't believe how lifelike it looks!" "Can I hold?" asked Ryan. "Feels like my real one." He held it and fingered it like it was his own and I could see his boyhood rising to imitate it. He was quite curious as he inspected every inch. "It's OK to put it into your mouth," I said. He looked at me inquisitively, as if the prospect of sucking his own dick was not something he had pondered. Then he raised it to his lips and tentatively licked it. The dowel was still embedded in the interior, so it was very stiff. He put it in his mouth and let it slid all the way in, holding the model by the balls. "That's funny!" he giggled as he pulled off of it. "I can suck my own penis!" I looked over to get Lo's reaction and he already had demolded his and had it half way down his throat, imitated what Ryan had just done. "What do you think, Lo?" I asked. "Mmppfft," he said around a mouthful of his own cock likeness. "I like them both!" I took the models from them and demolded Jamie's cock model to keep here. I carefully removed the dowels from theirs and wrapped them in tissue paper. "These can go with you to get wired up, if you like," I said. "Do you have enough sensors and piezos to do Jamie's, yours, and Ryan's?" "I know I have enough for Jamie's, but not enough for ours," he said. "But we don't really need them; we are not long distance lovers. Just give me Jamie's." I hadn't thought of that, but it made sense. They pretty much had access to each other whenever they wanted. "Well then, how about if I just make plain solid models for you to keep under each other's pillows?" I asked. They both laughed and nodded their heads. "I'll have to pour them later so you don't have to wait around for them," I said "OK," Lo replied, "We can pick them up when we bring Jamie's back. We all started getting dressed again and I saw Ryan pull Lo down to him to whisper in his ear. "Ryan wants to know if he can have a model of yours and if he can meet Kyle and Jamie," he asked. "Let me think about that," I replied, "I don't know if I want clones of my dick all over town! Kyle and Ryan will be here this weekend, but we have a pretty tight schedule with soccer practice and a game, but I'll ask the boys. Maybe when they see your model they'll want to meet the real thing." Ryan giggled when he thought of the boys fondling the model of his little cock and balls." "OK, Mike," Ryan said and he came to me and hugged me around the waist. "Thanks for your great work, Lo, and for introducing me to Ryan," I said. Lo came over and hugged me too, in a fraternal sort of way. "Thanks for making me a part of this project, Mike," he said, "I can always count on you being on the cutting edge of technology! I'm going to try to get Jamie's back to you by tomorrow so you'll have it for when the boys are here. I've done the others, so I have a system down pat. It shouldn't be a problem. I have Ryan for the weekend, so call me if the boys want to meet him." "Thanks, Lo," I said, "Is that OK with you, Ryan?" "Very OK, Mike," he answered. Lo picked up the box containing Jamie's mold and model and they left the lab. I took the model of Jamie's dick that was left behind and coated it with mold release and then with a layer of the mold compound. In a few minutes I would have another mold of Jamie's cock made from his model. I took advantage of the time to go into the house to relieve myself and to make a few calls to clients. I felt I had to at least make a pretense of getting some work done. I was back in the lab in twenty minutes. I demolded Jamie's new mold and set it up next to Kyle's, mine, Lo's, and Ryan's, in an assembly line and sprayed them all with mold release. I mixed up a mega batch of the pink modeling silicon and poured them right down the line. What a sight! I had better make sure I kept the lab door locked and visitors at arm's length. I went back to the office to do some research on how to reinforce the molds to concentrate the force of the piezo fibers. I brought up the web site of the mold making compound supplier (Smooth-On.com) and found that had instructional videos up on YouTube. I found the one I wanted and saw how to wrap the mold in a cotton batting like material and then with a harder material to provide both a soft layer to allow gentle expansion, but also a stiff backing to enhance the feeling of movement. I had the choice of a plaster cast like material or a lightweight fiberglass. I chose the fiberglass and ordered it for overnight delivery. I also ordered a special lube they had made just for the silicon products. I switched back to work mode and responded to some emails and voice mail messages. It was almost noon when I looked at the clock. I ran to the lab and checked the molds. They were cured enough to demold, so I started down the line taking dick after dick out of their molds. I laughed to myself at how funny this would look to an observer. I rechecked the lock on the door and continued. I couldn't help running my fingers over each one of them as it was revealed. They were so incredibly life like! I laid each one out next to its mold on tissue paper. When I was done I stood back and viewed five marvelous cocks of varying sizes laid out in a row! I resisted the urge to take a photo and instead prepared the molds for another pour. I mixed and poured another round and went into the house to get some lunch.